Make bead in 20 minutes? Oh yes! Bead work is not as stressful as people painted it. Many believe it is time consuming but am here to inform you that it is not really the way they think it is. All you need to get things done in bead making is focus, pasion, and creative mindset. In this post, I will take you through how you can make bead in 20 minutes or more. Bead work is the art or craft of attaching beads to one another or to clothes using a needle and thread. Most bead work takes the form of jewelry or other personal adornment, but beads are also used in wall hanging and sculpture.
Beadwork techniques are broadly divided into loom and off loom weaving, stringing, bead embroidery, bead crochet, and bead knitting. Most culture have employed beads for personal adjournment. Archeological records shows that people made and used beads as long as 5,000 years ago.
Beads have also been used for religious purposes, as good luck talismans, and as curative agents. European bead work has a history dating back millennia, to when shells and animal bone were used as bead in necklaces. Glass beads were being made in Murano by end of the 14th century, and lamp work glass was invented were being made 1700s, seed beads began to be used for embroidery, crotchet, and numerous off loom techniques. To make bead in 20 minutes just take the information below into consideration:
Types of beads and beading tools to get you started
- Different types of beads
- Cat eye
- Black (Hornix)
- Tiger eye
- Jade (green)
- Pearle (white/cream)
- Coral (genuine)
- Fresh water pears
- Swarovski (tiny beads)
- Antique and collectible
- Sterling silver
- Seed (Japanese)
- Prayer beads, e.g, Rosary, Anglican beads, Budhist, e.t.c.
- African trade beads
- Aurora Borealis
- Strup beads
- Tears drop
- Carribeans beads
- Dices beads
- Combs beads Pearls beads.
Beading Tools and Materials You Need
- Plier ( flat nose and round nose)
- Turner (plier)
- Fishing line ( different sizes)
- Tiger line
- Copper wire and Brass
- Crimp beads ( sterling silver)
- Micro crimp beads
- Soft flex
- Metal wire
- Nylon thread
- Plastic tubing
- Sprung neckline wire
- Eye pins and Head pins
- Greek leather
- Stretch magic
- Illusion cord
- Design Board
- Spiral charm
- Dommy block
- Ear top or loop
- Hand rubber
- Neck stand
Nylon Threads: They are very robust. They come in a variety of colours and thickness, the finest nylon thread is often used for threading on small glass beads or for making knotted, combweb-type necklaces. The thickest thread can be used in much the same was as tiger tail. They should not be used for weaving with beads, However, as they are fairly stiff.
Tiger Tail: Is a nylon covered thin metal wire that comes in variety of colours and thicknesses. It is one of most robust threads available and suitable for use with weighty beads made from glass and stone. As tiger tail is fairly stiff, it is impractical to make knots in it, so you should secure it with small metal beads, known as crimp beads, which for you can crush using a pair of flat nosed pliers. Tiger tail is also suitable for making necklaces where the threads is visible.
Metal Wire: They are made either from brass or enameled copper and are ideal for more solid pieces of Jewelry. They are easy to shape by hand. Although these wires are made from metal, they are fragile and should only be twisted gently.
Clasps: There are several types of claps and it is important that you choose a claps suited to the type of jewelry you intend to make and the weight of the finished piece. We have barrel clasps, Round and trigger claps, Toggle clasps, Press stud clasps, Plastic clasps. e.t.c.
Crimp Beads: Are small metal beads that are used to secure wires when knotting is impractical. Use them on tiger tail and nylon threads.
Beads Tip: Are small, shell like beads that can be closed around a knot or crimp bead for a neat finish. To make your jewelry more secure, apply a small amount of glue to the knot before closing the bead tip.
Make bead in 20 minutes
Pliers: Flat nosed pliers are made by electricians, Always go for the thinnest pliers available. You can use flat nosed pliers to squeeze crimp bead and secure most end pieces.
Types of wire
There are two different types of wire used for the production of various wire works. They are:
Daries is made of gold, It has no other colour except gold.
Real wire has different types of colour. They can be seen in red, green, yellow, e.t.c. They are also in champagne gold.
Stringing starts from knowing the type of designs you want to make with your beads. The design will authomatically determine how you start stringing. However, the following steps are important’’
Using Fishing Line: One layer bead.
String a fishing line round the bead, if the neck size is between 14, 16 inches, you make your string to be 25 inches for fishing at the end. String your bead round and attach the hook at the end on both ends.
Using Wire Or Copper
Bend one wire end into a loop. String your beads round and bend the wire end into a loop.
How To Make Two Layers Using Fishing Line
String the first layer and attach to a clasps at the end. String the 2nd layer, add to the 2nd layers for it to lay and set well. E.g. If the 1st layer is 30 beads, make the 2nd layer between 32 or 34.
The same process goes with it as you string you increase the layers to accommodate for addition. E.g Four layers to increase the 2nd , 3rd ,and 4th layers by at least by each.
How To Make Stringing With Pendant
Put the pendant in the middle or size as the case may be. Use a tiny fishing line ( 25 or 30 ) to string start from the right side. Insert the fish line into the pendant hole and interlock it, then string your beads to the end, do the other side also, and you continue like that till you end your stringing.
Make bead in 20 minutes
Pending Bead includes;
- 1 Layer
- 2 Layers
- 3 Layrs
- 4 Layers, e.t.c, depending on the size of stones or beads and the divider used.
Cut a 16 inches silver wire lenght and set it aside. Wrap the rest of the beads and design as you like.
How To Make Ball 1, Beads.
Step 1: Insert 3 beads inside the fishing line
Step 2: Crossing with 1 bead.
Step 3: Insert 1 bead to the left, another to the right.
Step 4: Cross with 1 bead.
Step 5: Insert 1 bead to the left, another to the right.
Step 6: Cross with the first crossed beads at the first step above
Step 7: Knot together and start passing until it get tight.
To Make Ladder Design
Step 1: Insert three beads into the fishing line
Step 2: Cross with one bead
Step 3: Insert another bead to the left and to the right and then crossed with another bead.
Step 4: Continue doing this until your desire length.
Step 5: Knot at the top and start joining together.
Step 6: To make a mat desire
Step 7: Add your plate broche if necessary.
Step 1: Insert one comb bead into your measuring wires.
Step 2: Insert another two comb beads into the wire and continue until your desire to 6 or 7 layers.
Step 3: Start from 7 and from (7) you stop until 1
Step 4: Knot and spiral backwards.
Step 1: Measure your desire measurement size
Step 2: Use your round nose and hoop inward (3) times
Step 3: Continue to bring the inward until your desire measure or size.
Step 4: Cut the ones coming inwards neatly and do other ones correctly.
Step 1: Measure your desire measure/ design
Step 2: Loop inward to the right and to the left
Step 3: Join them together until your measure neck seize.
Figure 8 Design
Step 1: Measure your desire length size
Step 2: Loop inward to the right and to the left of your wire
Step 3: Join them together by piping until your neck measurement.
Step 1: Use your measuring tape or shape object to cut out your desired shape.
Step 2: Use pencil candle stick to roll out your wire.
Step 3: Count while rolling out your shape.
Step 4: ( 50mm) is use to knot your ( 90) rolled
Step 5: Make a hook to knot your pumpkin design.
There are several ways of making or Knitting your design on your tools.
Step 1: Knot your wires together
Step 2: Knot it to the wonder knitters mouth and start knitting to the right
Step 3: Until you get your desired measured size.
Step 4: Make a loop and 1 wire to make a hook and add your E-6000 gum to it to make it very solid and strong.
Step 5: Add beads if necessary.
Step 6: Your desire necklace ready for use
Disclaimer: The contents on this site are intended to enhance public access to educational information and other endeavors. While every effort is made in preparing good information, no responsibility is accepted by or on behalf of this site for any errors. Although every effort is made to ensure the reliability of this site.
Copyright: Contents on this website may not be republished, reproduced, redistributed either in whole or in part without due permission or acknowledgement. All contents are protected by DMCA.
If you own this content & believe your copyright was violated or infringed, make sure you contact us via This Means to file a complaint & actions will be taken immediately.